The feeding module consists of 2 feeding rolls – a steel roll and a rubber coated rolls. The feeding speed is 20 m/min. (60’/min.), and the feeding accuracy is +/- 0,3 mm/meter (0.015”/yard).
The straightening module has 5 or 7 straightening rolls. The straightening rolls are adjusted manually, and their positions are read off scales. The achievable straightness is in accordance with DIN 10133 for cold-rolled fine sheet.
As standard the slitting module has 2 pairs of slitting blades corresponding to the maximum nominal capacity of the cutting line. If the numbers of slitting blades is increased the capacity of the cutting line decreases correspondingly. The slitting blades are activated and deactivated manually by lowering or lifting the upper slitting shaft by means of an eccentric lever. Slitting blades can be easily moved or changed as the slitting shafts are mounted in guides.
The cutting module contains a motorized shear in special execution. The material is held efficiently by a hold down unit with rubber coating. The shear blades are turnable ensuring a long life time.
The control has a touch screen. The control is programmable and can be used in manual or automatic operation.
Decoilers and other modules: please refer to pages QLA Decoilers and QLA Stacking Units. | 
